Pinpoint the precise area you want watered. Eliminate overspray entirely even if the system pressure is as high as 165 psi.

Say goodbye to 5', 8', 10' and 12' nozzles. LittleValves can bring the spray from a 15 foot radius nozzle down to 4 feet without distortion and without closing down. The larger orifice of 15' nozzles has less chance of getting clogged and is easier to clean.

Pop-up risers stay in the extended "UP" position even when the nozzle is removed so there's no need for special tools nor a helper to hold up the riser while flushing the lines. Since the riser stays up, dirty water can't flow back into the sprinkler lines.

Service individual spray heads and above-grade sprinklers without shutting down the whole system. Save time and water not going back and forth to the controller. Save when heading up new jobs or servicing existing ones even if you have remote control.

Independent testing confirms 30% to 80% higher uniform water application with adjusted-down 15' nozzles compared to smaller radius nozzles. The higher uniformity means you save from 7% to 47% of the water normally used to irrigate a given area. (See the Actual Water Savings table on the last page of this site.) Higher uniformity also means your jobs will look better.

With total control over each head, at radiuses of 11' or less, misting is eliminated entirely; over 11', misting is substantially reduced.

No more getting blasted with water while removing nozzles when the system is running in order to save trips to the controller.

Eliminate erosion while flushing lines, risers and heads during the installation or servicing of sprinklers on hillside slopes.

LittleValves override high pressure because every LittleValve product is an adjustable pressure compensating unit. Eliminate pressure compensating screens and devices. Also, eliminate pressure-regulating stems. If pressure is under 165 psi, you don't need pressure regulation at beginning of system.

Now you can have drip systems without 1/4" tubing. Take an 18' adjustable nozzle all the way down to just a drip. Also eliminate special filters, emitters, pressure regulators and, in most cases, special valves. Use 8' flat nozzles for the finest micro-spray available. And, with LittleValve parts, you can mix drips, micro-sprays and regular sprays on the same valve system.

Saves hours of labor which means dollars in your pocket.

Fittings and stationary shrub bodies (shrub adapters) are slotted. Use just one pair of channel locks and a $3.85 open-end wrench when working on them instead of two klutzy $11.00 pairs of channel locks.

Complete flow control even if the filter screen is missing. No distorted spray when limiting flow and no vibrating adjustment screws that shut themselves off. Never again touch that little screw on top of the head.

LittleValve products provide your customers and your reputation with the finest irrigation systems possible. No other company offers this 21st century technology featuring maintenance and water friendly sprinkler parts and fittings.

It's like having a little gate valve under every sprinkler head you ever had to work on.

Eliminates irrigation aggravation by making your sprinkler systems maintenance friendly.

A great way to make money by upgrading the existing systems of your customers. In the long run, this saves them water and future maintenance costs and, as a result, makes your own jobs easier. Everybody Wins!

If a nozzle gets lost, cut off or broken, the rest of the system still operates at approximately 90% of its efficiency.